Commands are entered at the command prompt,AT-9724TS:4#.
There are a number of helpful features included in the CLI. Entering the ? command will display a list of all of the top-level commands.
Figure 2-2. The ? Command
When you enter a command without its required parameters, the CLI will prompt you with a Next possible completions:message.
Figure 2-3. Example Command Parameter Help
In this case, the command config account was entered with the parameter <username>.The CLI will then prompt you to enter the <username> with the
message, Next possible completions:. Every command in the CLI has this feature, and complex commands have several layers of parameter prompting.
In addition, after typing any given command plus one space, you can see all of the next possible sub-commands, in sequential order, by repeatedly pressing the Tab
key.
To re-enter the previous command at the command prompt,press the up arrow cursor key.The previous command will appear at the command prompt.
11
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual
AT-9724TS
AT-9724TS