show ssl
Purpose Used to view the SSL status and the certificate file status on the Switch.
Syntax show ssl {certificate}
Description This command is used to view the SSL status on the Switch.Adding the certificate parameter will allow the
user to view the certificate file information currently set on the Switch.
Parameters {certificate} – Adding this parameter will allow the user to view certificate file information currently
implemented on the Switch.
Restrictions None.
Example usage:
To view the SSL status on the Switch:
AT-9724TS:4# show ssl
Command: show ssl
SSL status D i s a b l e d
R S A _ W I T H _ R C 4 _ 1 2 8 _ M D 5 0 x 0 0 0 4 E n a b l e d
R S A _ W I T H _ 3 D E S _ E D E _ C B C _ S H A 0 x 0 0 0 A E n a b l e d
D H E _ D S S _ W I T H _ 3 D E S _ E D E _ C B C _ S H A 0 x 0 0 1 3 E n a b l e d
R S A _ E X P O R T _ W I T H _ R C 4 _ 4 0 _ M D 5 0 x 0 0 0 3 E n a b l e d
A T - 9 7 2 4 T S : 4 #
Example usage:
To view certificate file information on the Switch:
AT-9724TS:4# show ssl certificate
Command: show ssl certificate
Loaded with RSA C e r t i f i c a t e !
A T - 9 7 2 4 T S : 4 #
165
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual