Allied Telesis AT-9724TS Reference Manual

Example usage:
To create an SNMP group named “sg1”:
AT-9724TS:4# create snmp group sg1 v3 noauth_nopriv
read_view v1 write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv
read_view v1 write_view v1 notify_view v1
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
delete snmp group
Purpose Used to remove an SNMP group from the Switch.
Syntax delete snmp group <groupname 32>
Description The delete snmp group command is used to remove an SNMP group from the Switch.
Parameters <groupname 32> – An alphanumeric name of up to 32 characters that will identify the SNMP group to be
deleted.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the SNMP group named “sg1”:
AT-9724TS:4# delete snmp group sg1
Command: delete snmp group
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
show snmp groups
Purpose Used to display the group-names of SNMP groups currently configured on the Switch.The security model, level,
and status of each group are also displayed.
Syntax show snmp groups
Description The show snmp groups command displays the group-names of SNMP groups currently configured on the
Switch.The security model, level, and status of each group are also displayed.
Parameters None.
Restrictions None.
Example usage:
To display the currently configured SNMP groups on the Switch:
AT-9724TS:4# show snmp groups
Command: show snmp groups
V A C M Access Table Settings
Group Name : Group3
ReadView Name : ReadView
WriteView Name : WriteView
Notify View Name : NotifyView
Security Model : SNMPv3
Security Level : NoAuthNoPriv
Group Name : Group4
ReadView Name : ReadView
WriteView Name : WriteView
41
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual

Allied Telesis AT-9724TS Specifications

General

MAC address table	16000 entries
Packet buffer memory	2 MB
Maximum data transfer rate	88 Gbit/s
Full duplex	Yes
Dimensions (WxDxH)	440 x 210 x 44 mm
Power requirements	100-240V AC/50-60Hz
Management platform	SNMP, RMON
Networking features	IEEE 802.3 10T Ethernet, IEEE 802.3u 100TX Ethernet, IEEE 802.3ab 1000T Ethernet, IEEE 802.3z 1000X Ethernet
Connectivity technology	Wired
DHCP features	DHCP client
Security algorithms	SSH
Switch type	Managed
Switch layer	L3+
SFP/SFP+ slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	24
Memory type	SDRAM / Flash
Flash memory	16 MB
Internal memory	256 MB
Power consumption (typical)	90 W
Certification	UL 1950 FCC Class A CSA 22.2 No. 950 EN55022 Class A EN 60950 (TUV) EN50082-1 CE
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	3200 g