Allied Telesis AT-9724TS Reference Manual

49
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual
enable rmon
Purpose Used to enable RMON on the Switch.
Syntax enable rmon
Description This command is used, in conjunction with the disable rmon command below, to enable and disable remote
monitoring (RMON) on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable RMON:
AT-9724TS:4# enable rmon
Command: enable rmon
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
disable rmon
Purpose Used to disable RMON on the Switch.
Syntax disable rmon
Description To view the HOL prevention status. This command is used, in conjunction with the enable rmon command
above, to enable and disable remote monitoring (RMON) on the Switch. AT-9724TS:4# show
hol_prevention.
Parameters None. Device HOL Prevention State Enabled.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable RMON:
AT-9724TS:4# disable rmon
Command: disable rmon
S u c c e s s .
A T - 9 7 2 4 T S : 4 #

Allied Telesis AT-9724TS Specifications

General

MAC address table	16000 entries
Packet buffer memory	2 MB
Maximum data transfer rate	88 Gbit/s
Full duplex	Yes
Dimensions (WxDxH)	440 x 210 x 44 mm
Power requirements	100-240V AC/50-60Hz
Management platform	SNMP, RMON
Networking features	IEEE 802.3 10T Ethernet, IEEE 802.3u 100TX Ethernet, IEEE 802.3ab 1000T Ethernet, IEEE 802.3z 1000X Ethernet
Connectivity technology	Wired
DHCP features	DHCP client
Security algorithms	SSH
Switch type	Managed
Switch layer	L3+
SFP/SFP+ slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	24
Memory type	SDRAM / Flash
Flash memory	16 MB
Internal memory	256 MB
Power consumption (typical)	90 W
Certification	UL 1950 FCC Class A CSA 22.2 No. 950 EN55022 Class A EN 60950 (TUV) EN50082-1 CE
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	3200 g