show session
Purpose Used to display a list of currently logged-in users.
Syntax show session
Description This command displays a list of all the users that are logged-in at the time the command is issued.
Parameters None.
Restrictions None.
Example usage:
To display the way that the users logged in:
AT-9724TS:4# show session
Command:show session
I D Live Time F r o m L e v e l N a m e
- - - - - - - - - - - - - - - - - - - - - - - -
* 8 0 3 : 3 6 : 2 7 Serial Port 4 A n o n y m o u s
Total Entries: 1
show switch
Purpose Used to display information about the Switch.
Syntax show switch
Description This command displays information about the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the Switch information:
AT-9724TS:4# show switch
Command:show switch
Device Type : AT-9724TS Stackable Ethernet
S w i t c h
Unit ID : 1
MAC Address : D A - 1 0 - 2 1 - 0 0 - 0 0 - 0 1
IP Address : 10.41.44.22 (Manual)
VLAN Name : d e f a u l t
Subnet Mask : 2 5 5 . 0 . 0 . 0
Default Gateway : 0 . 0 . 0 . 0
Boot PROM Version : Build 2.00-B04
Firmware Version : Build 3.00-B16
Hardware Version : 2 A 1
Device S/N :
System Name : A T - 9 7 2 4 T S _ # 3
System Location : 7 t h _ f l r _ e a s t _ c a b i n e t
System Contact : J u l i u s _ E r v i n g _ 2 1 2 - 5 5 5 - 6 6 6 6
Spanning Tree : D i s a b l e d
G V R P : D i s a b l e d
IGMP Snooping : D i s a b l e d
R I P : D i s a b l e d
D V M R P : D i s a b l e d
P I M - D M : D i s a b l e d
O S P F : D i s a b l e d
T E L N E T : Enabled (TCP 23)
W E B : Enabled (TCP 80)
R M O N : E n a b l e d
8 0 2 . 1 x : D i s a b l e d
Jumbo Frame : O f f
19
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual