Allied Telesis AT-9724TS Reference Manual

show sntp
Purpose Used to display the SNTP information.
Syntax show sntp
Description This command will display SNTP settings information including the source IP address, time and poll interval.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display SNTP configuration information:
AT-9724TS:4# show sntp
Command: show sntp
Current Time Source : System Clock
S N T P : Disabled
SNTP Primary Server : 10.1.1.1
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval : 720 sec
A T - 9 7 2 4 T S : 4 #
enable sntp
Purpose Enables SNTP server support.
Syntax enable sntp
Description This will enable SNTP support. SNTP service must be separately configured (see config sntp). Enabling and
configuring SNTP support will override any manually configured system time settings.
Parameters None.
Restrictions Only administrator-level users can issue this command. SNTP settings must be configured for SNTP to function
(config sntp).
Example usage:
To enable the SNTP function:
AT-9724TS:4# enable sntp
Command: enable sntp
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
206
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual

Allied Telesis AT-9724TS Specifications

General

MAC address table	16000 entries
Packet buffer memory	2 MB
Maximum data transfer rate	88 Gbit/s
Full duplex	Yes
Dimensions (WxDxH)	440 x 210 x 44 mm
Power requirements	100-240V AC/50-60Hz
Management platform	SNMP, RMON
Networking features	IEEE 802.3 10T Ethernet, IEEE 802.3u 100TX Ethernet, IEEE 802.3ab 1000T Ethernet, IEEE 802.3z 1000X Ethernet
Connectivity technology	Wired
DHCP features	DHCP client
Security algorithms	SSH
Switch type	Managed
Switch layer	L3+
SFP/SFP+ slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	24
Memory type	SDRAM / Flash
Flash memory	16 MB
Internal memory	256 MB
Power consumption (typical)	90 W
Certification	UL 1950 FCC Class A CSA 22.2 No. 950 EN55022 Class A EN 60950 (TUV) EN50082-1 CE
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	3200 g