Allied Telesis AT-9724TS Reference Manual

Chapter 27 - Stacking Commands
The stacking configuration commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
Commands Parameters
config box_priority current_box_id <value 1-12> priority <value 1-16>
config box_id current_box_id <value 1-12> new_box_id [AUTO | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12]
config box_type current_box_id <value 1-12> type [AT-9724TS | BOX_NOTEXIST]
config all_boxes_id [static_mode | auto_mode]
show stack_information
Each command is listed, in detail, in the following sections.
config box_priority
Purpose Used to configure box priority, which determines which box becomes master. Lower numbers have higher
priority.
Syntax config box_priority {current_box_id <value 1-12> priority <value 1-16>}
Description This command configures box (switch) priority.
Parameters current_box_id <value 1-12> – Identifies the Switch being configured. Range is 1-12.
priority <value 1-16> – Assigns a priority value to the box, with lower numbers having higher priority.
Range is 1-16.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure box priority:
AT-9724TS:4# config box_priority current_box_id 1 priority
1
Command: config box_priority current_box_id 1 priority 1
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
193
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual

Allied Telesis AT-9724TS Specifications

General

MAC address table	16000 entries
Packet buffer memory	2 MB
Maximum data transfer rate	88 Gbit/s
Full duplex	Yes
Dimensions (WxDxH)	440 x 210 x 44 mm
Power requirements	100-240V AC/50-60Hz
Management platform	SNMP, RMON
Networking features	IEEE 802.3 10T Ethernet, IEEE 802.3u 100TX Ethernet, IEEE 802.3ab 1000T Ethernet, IEEE 802.3z 1000X Ethernet
Connectivity technology	Wired
DHCP features	DHCP client
Security algorithms	SSH
Switch type	Managed
Switch layer	L3+
SFP/SFP+ slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	24
Memory type	SDRAM / Flash
Flash memory	16 MB
Internal memory	256 MB
Power consumption (typical)	90 W
Certification	UL 1950 FCC Class A CSA 22.2 No. 950 EN55022 Class A EN 60950 (TUV) EN50082-1 CE
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	3200 g