Allied Telesis AT-9724TS Reference Manual

disable sntp
Purpose Disables SNTP server support.
Syntax disable sntp
Description This will disable SNTP support. SNTP service must be separately configured (see config sntp).
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable the SNTP function:
AT-9724TS:4# disable sntp
Command: disable sntp
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
config time
Purpose Used to manually configure system time and date settings.
Syntax config time date <date ddmthyyyy> <time hh:mm:ss>
Description This will configure the system time and date settings.These will be overridden if SNTP is configured and
enabled.
Parameters date – Express the date using two numerical characters for the day of the month, three alphabetical characters
for the name of the month, and four numerical characters for the year. For example: 03aug2003.
time – Express the system time using the format hh:mm:ss, that is, two numerical characters each for the hour
using a 24-hour clock, the minute and second. For example: 19:42:30.
Restrictions Only administrator-level users can issue this command. Manually configured system time and date settings are
overridden if SNTP support is enabled.
Example usage:
To manually set system time and date settings:
AT-9724TS:4# config time 30jun2003 16:30:30
Command: config time 30jun2003 16:30:30
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
207
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual

Allied Telesis AT-9724TS Specifications

General

MAC address table	16000 entries
Packet buffer memory	2 MB
Maximum data transfer rate	88 Gbit/s
Full duplex	Yes
Dimensions (WxDxH)	440 x 210 x 44 mm
Power requirements	100-240V AC/50-60Hz
Management platform	SNMP, RMON
Networking features	IEEE 802.3 10T Ethernet, IEEE 802.3u 100TX Ethernet, IEEE 802.3ab 1000T Ethernet, IEEE 802.3z 1000X Ethernet
Connectivity technology	Wired
DHCP features	DHCP client
Security algorithms	SSH
Switch type	Managed
Switch layer	L3+
SFP/SFP+ slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	24
Memory type	SDRAM / Flash
Flash memory	16 MB
Internal memory	256 MB
Power consumption (typical)	90 W
Certification	UL 1950 FCC Class A CSA 22.2 No. 950 EN55022 Class A EN 60950 (TUV) EN50082-1 CE
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	3200 g