EasyManuals Logo

Allied Telesis AT-9724TS Reference Manual

Allied Telesis AT-9724TS
282 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #164 background imageLoading...
Page #164 background image
disable ssl
Purpose To disable the SSL function on the Switch.
Syntax disable ssl {ciphersuite {RSA_with_RC4_128_MD5 | RSA_with_3DES_EDE_CBC_SHA |
DHE_DSS_with_3DES_EDE_CBC_SHA | RSA_EXPORT_with_RC4_40_MD5}}
Description This command will disable SSL on the Switch and can be used to disable any one or combination of listed
ciphersuites on the Switch.
Parameters ciphersuite A security string that determines the exact cryptographic parameters, specific encryption
algorithms and key sizes to be used for an authentication session.The user may choose any combination of the
following:
RSA_with_RC4_128_MD5 This ciphersuite combines the RSA key exchange, stream cipher RC4
encryption with 128-bit keys and the MD5 Hash Algorithm.
RSA_with_3DES_EDE_CBC_SHA This ciphersuite combines the RSA key exchange,
CBC Block Cipher 3DES_EDE encryption and the SHA Hash Algorithm.
DHE_DSS_with_3DES_EDE_CBC_SHA This ciphersuite combines the DSA Diffie Hellman
key exchange, CBC Block Cipher 3DES_EDE encryption and SHA Hash Algorithm.
RSA_EXPORT_with_RC4_40_MD5 This ciphersuite combines the RSA Export key exchange,
stream cipher RC4 encryption with 40-bit keys.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable the SSL status on the Switch:
AT-9724TS:4# disable ssl
Command: disable ssl
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
Example usage:
To disable ciphersuite RSA_EXPORT_with_RC4_40_MD5 only:
AT-9724TS:4# disable ssl ciphersuite
R S A _ E X P O R T _ w i t h _ R C 4 _ 4 0 _ M D 5
Command: disable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
163
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual

Table of Contents

Other manuals for Allied Telesis AT-9724TS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allied Telesis AT-9724TS and is the answer not in the manual?

Allied Telesis AT-9724TS Specifications

General IconGeneral
MAC address table16000 entries
Packet buffer memory2 MB
Maximum data transfer rate88 Gbit/s
Full duplexYes
Dimensions (WxDxH)440 x 210 x 44 mm
Power requirements100-240V AC/50-60Hz
Management platformSNMP, RMON
Networking featuresIEEE 802.3 10T Ethernet, IEEE 802.3u 100TX Ethernet, IEEE 802.3ab 1000T Ethernet, IEEE 802.3z 1000X Ethernet
Connectivity technologyWired
DHCP featuresDHCP client
Security algorithmsSSH
Switch typeManaged
Switch layerL3+
SFP/SFP+ slots quantity4
Basic switching RJ-45 Ethernet ports quantity24
Memory typeSDRAM / Flash
Flash memory16 MB
Internal memory256 MB
Power consumption (typical)90 W
CertificationUL 1950 FCC Class A CSA 22.2 No. 950 EN55022 Class A EN 60950 (TUV) EN50082-1 CE
Storage temperature (T-T)-25 - 55 °C
Operating temperature (T-T)0 - 40 °C
Weight and Dimensions IconWeight and Dimensions
Weight3200 g

Related product manuals