Allied Telesis AT-9724TS Reference Manual

create snmp view
Purpose Used to assign views to community strings to limit which MIB objects and SNMP manager can access. .
Syntax create snmp view <view_name 32> <oid> view_type [included | excluded]
Description The create snmp view command assigns views to community strings to limit which MIB objects an SNMP
manager can access.
Parameters <view_name 32> – An alphanumeric string of up to 32 characters that identifies the SNMP view that will be
created.
<oid> – The object ID that identifies an object tree (MIB tree) that will be included or excluded from access by
an SNMP manager.
included – Include this object in the list of objects that an SNMP manager can access.
excluded – Exclude this object from the list of objects that an SNMP manager can access.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an SNMP view:
AT-9724TS:4# create snmp view Allied Telesynview
1.3.6 view_type included
Command: create snmp view Allied Telesynview
1.3.6 view_type included
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
delete snmp view
Purpose Used to remove an SNMP view entry previously created on the Switch.
Syntax delete snmp view <view_name 32> [all | <oid>]
Description The delete snmp view command is used to remove an SNMP view previously created on the Switch.
Parameters <view_name 32> – An alphanumeric string of up to 32 characters that identifies the SNMP view to be deleted.
all – Specifies that all of the SNMP views on the Switch will be deleted.
<oid> – The object ID that identifies an object tree (MIB tree) that will be deleted from the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete a previously configured SNMP view from the Switch:
AT-9724TS:4# delete snmp view Allied Telesynview all
Command: delete snmp view Allied Telesynview all
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
36
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual

Allied Telesis AT-9724TS Specifications

General

MAC address table	16000 entries
Packet buffer memory	2 MB
Maximum data transfer rate	88 Gbit/s
Full duplex	Yes
Dimensions (WxDxH)	440 x 210 x 44 mm
Power requirements	100-240V AC/50-60Hz
Management platform	SNMP, RMON
Networking features	IEEE 802.3 10T Ethernet, IEEE 802.3u 100TX Ethernet, IEEE 802.3ab 1000T Ethernet, IEEE 802.3z 1000X Ethernet
Connectivity technology	Wired
DHCP features	DHCP client
Security algorithms	SSH
Switch type	Managed
Switch layer	L3+
SFP/SFP+ slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	24
Memory type	SDRAM / Flash
Flash memory	16 MB
Internal memory	256 MB
Power consumption (typical)	90 W
Certification	UL 1950 FCC Class A CSA 22.2 No. 950 EN55022 Class A EN 60950 (TUV) EN50082-1 CE
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	3200 g