Allied Telesis AT-9724TS Reference Manual

config ssh algorithm
Purpose Used to configure the SSH algorithm.
Syntax config ssh algorithm [3DES | AES128 | AES192 | AES256 | arcfour | blowfish | cast128 |
twofish128 | twofish192 | twofish256 | MD5 | SHA1 | DSA | RSA] [enable | disable]
Description This command allows you to configure the desired type of SSH algorithm used for authentication encryption.
Parameters 3DES – This parameter will enable or disable the Triple_Data Encryption Standard encryption algorithm.
AES128 – This parameter will enable or disable the Advanced Encryption Standard AES128 encryption
algorithm.
AES192 – This parameter will enable or disable the Advanced Encryption Standard AES192 encryption
algorithm.
AES256 – This parameter will enable or disable the Advanced Encryption Standard AES256 encryption
algorithm.
arcfour - This parameter will enable or disable the Arcfour encryption algorithm.
blowfish – This parameter will enable or disable the Blowfish encryption algorithm.
cast128 – This parameter will enable or disable the Cast128 encryption algorithm.
twofish128 – This parameter will enable or disable the twofish128 encryption algorithm.
twofish192 – This parameter will enable or disable the twofish192 encryption algorithm.
MD5 – This parameter will enable or disable the MD5 Message Digest encryption algorithm.
SHA1 – This parameter will enable or disable the Secure Hash Algorithm encryption.
DSA – This parameter will enable or disable the Digital Signature Algorithm encryption.
RSA – This parameter will enable or disable the RSA encryption algorithm.
[enable | disable] – This allows you to enable or disable algorithms entered in this command, on the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the SSH algorithm:
AT-9724TS:4# config ssh algorithm Blowfish enable
Command: config ssh algorithm Blowfish enable
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
159
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual

Allied Telesis AT-9724TS Specifications

General

MAC address table	16000 entries
Packet buffer memory	2 MB
Maximum data transfer rate	88 Gbit/s
Full duplex	Yes
Dimensions (WxDxH)	440 x 210 x 44 mm
Power requirements	100-240V AC/50-60Hz
Management platform	SNMP, RMON
Networking features	IEEE 802.3 10T Ethernet, IEEE 802.3u 100TX Ethernet, IEEE 802.3ab 1000T Ethernet, IEEE 802.3z 1000X Ethernet
Connectivity technology	Wired
DHCP features	DHCP client
Security algorithms	SSH
Switch type	Managed
Switch layer	L3+
SFP/SFP+ slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	24
Memory type	SDRAM / Flash
Flash memory	16 MB
Internal memory	256 MB
Power consumption (typical)	90 W
Certification	UL 1950 FCC Class A CSA 22.2 No. 950 EN55022 Class A EN 60950 (TUV) EN50082-1 CE
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	3200 g