enable clipaging
Purpose Used to pause the scrolling of the console screen when the show command displays more than one page.
Syntax enable clipaging
Description This command is used when issuing the show command which causes the console screen to rapidly scroll
through several pages.This command will cause the console to pause at the end of each page.The default
setting is enabled.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable pausing of the screen display when the show command output reaches the end of the page:
AT-9724TS:4# enable clipaging
Command:enable clipaging
S u c c e s s
A T - 9 7 2 4 T S : 4 #
disable clipaging
Purpose Used to disable the pausing of the console screen scrolling at the end of each page when the show command
displays more than one screen of information.
Syntax disable clipaging
Description This command is used to disable the pausing of the console screen at the end of each page when the show
command would display more than one screen of information.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable pausing of the screen display when the show command output reaches the end of the page:
AT-9724TS:4# disable clipaging
Command:disable clipaging
S u c c e s s
A T - 9 7 2 4 T S : 4 #
22
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual