Allied Telesis AT-9724TS Reference Manual

show serial_port
Purpose Used to display the current serial port settings.
Syntax show serial_port
Description This command displays the current serial port settings.
Parameters None.
Restrictions None.
Example usage:
To display the serial port setting:
AT-9724TS:4# show serial_port
Command:show serial_port
Baud Rate : 1 1 5 2 0 0
Data Bits : 8
Parity Bits : N o n e
Stop Bits : 1
A u t o - L o g o u t : 10 mins
A T - 9 7 2 4 T S : 4 #
config serial_port
Purpose Used to configure the serial port.
Syntax config serial_port {baud_rate [115200] | auto_logout [never | 2_minutes | 5_minutes |
10_minutes | 15_minutes]}
Description This command is used to configure the serial port’s baud rate and auto logout settings.
Parameters baud_rate [115200] – The serial bit rate that will be used to communicate with the management host.This
parameter is fixed at 115200.
never – No time limit on the length of time the console can be open with no user input.
2_minutes – The console will log out the current user if there is no user input for 2 minutes.
5_minutes – The console will log out the current user if there is no user input for 5 minutes.
10_minutes – The console will log out the current user if there is no user input for 10 minutes.
15_minutes – The console will log out the current user if there is no user input for 15 minutes.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure baud rate:
AT-9724TS:4# config serial_port baud_rate 115200
Command:config serial_port baud_rate 115200
S u c c e s s
A T - 9 7 2 4 T S : 4 #
21
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch

Allied Telesis AT-9724TS Specifications

General

MAC address table	16000 entries
Packet buffer memory	2 MB
Maximum data transfer rate	88 Gbit/s
Full duplex	Yes
Dimensions (WxDxH)	440 x 210 x 44 mm
Power requirements	100-240V AC/50-60Hz
Management platform	SNMP, RMON
Networking features	IEEE 802.3 10T Ethernet, IEEE 802.3u 100TX Ethernet, IEEE 802.3ab 1000T Ethernet, IEEE 802.3z 1000X Ethernet
Connectivity technology	Wired
DHCP features	DHCP client
Security algorithms	SSH
Switch type	Managed
Switch layer	L3+
SFP/SFP+ slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	24
Memory type	SDRAM / Flash
Flash memory	16 MB
Internal memory	256 MB
Power consumption (typical)	90 W
Certification	UL 1950 FCC Class A CSA 22.2 No. 950 EN55022 Class A EN 60950 (TUV) EN50082-1 CE
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	3200 g