Allied Telesis AT-9724TS Reference Manual

show md5
Purpose Used to display an MD5 key table.
Syntax show md5 {key <key_id 1-255>}
Description This command will display the current MD5 key table.
Parameters <key_id 1-255> – The MD5 key ID to be displayed.
Restrictions None.
Example usage:
To display the current MD5 key:
AT-9724TS:4# show md5
Command: show md5
MD5 Key Table Configurations
K e y - I D K e y
- - - - - - - - -
1 Allied Telesyn
2 d e v e l o p
3 f i r e b a l l
4 i n t e l l i g e n t
Total Entries: 4
A T - 9 7 2 4 T S : 4 #
249
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual

Allied Telesis AT-9724TS Specifications

General

MAC address table	16000 entries
Packet buffer memory	2 MB
Maximum data transfer rate	88 Gbit/s
Full duplex	Yes
Dimensions (WxDxH)	440 x 210 x 44 mm
Power requirements	100-240V AC/50-60Hz
Management platform	SNMP, RMON
Networking features	IEEE 802.3 10T Ethernet, IEEE 802.3u 100TX Ethernet, IEEE 802.3ab 1000T Ethernet, IEEE 802.3z 1000X Ethernet
Connectivity technology	Wired
DHCP features	DHCP client
Security algorithms	SSH
Switch type	Managed
Switch layer	L3+
SFP/SFP+ slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	24
Memory type	SDRAM / Flash
Flash memory	16 MB
Internal memory	256 MB
Power consumption (typical)	90 W
Certification	UL 1950 FCC Class A CSA 22.2 No. 950 EN55022 Class A EN 60950 (TUV) EN50082-1 CE
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	3200 g