show command_history
Purpose Used to display the command history.
Syntax show command_history
Description This command will display the command history.
Parameters None.
Restrictions None.
Example usage:
To display the command history:
AT-9724TS:4# show command_history
?
clear show vlan
config router_ports vlan2 add 1:1-1:10
config router_ports vlan2
config router_ports
create vlan vlan2 tag 3
create vlan vlan2 tag 2
show router ports
l o g i n
A T - 9 7 2 4 T S : 4 #
config command_history
Purpose Used to configure the command history.
Syntax config command_history <value 1-40>
Description This command is used to configure the command history.
Parameters <value 1-40> – The number of previously executed commands maintained in the buffer. Up to 40 of the latest
executed commands may be viewed.
Restrictions None.
Example usage:
To configure the command history:
AT-9724TS:4# config command_history 20
Command: config command_history 20
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
274
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual