delete port_security_entry_vlan_name
Purpose Used to delete an entry from the Switch’s port security settings.
Syntax delete port_security_entry_vlan_name <vlan_name 32> port <port> mac_address
<macaddr>
Description This command is used to remove an entry from the port security entries learned by the Switch and entered
into the forwarding database.
Parameters <vlan_name 32> - Enter the corresponding VLAN of the entry the user wishes to delete.
port <port> - Enter the corresponding port of the entry to delete.The port is specified by listing the lowest
switch number and the beginning port number on that switch, separated by a colon. For example, 1:3 specifies
switch number 1, port 3. 2:4 specifies switch number 2, port 4.
mac_address <macaddr> - Enter the corresponding MAC address of the entry the user wishes to delete.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete an entry from the port security list:
AT-9724TS:4# delete port_security_entry_vlan_name
default port 1:1 mac_address 00-0C-6E-73-2B-C9
Command: delete port_security_entry_vlan_name
default port 1:1 mac_address 00-0C-6E-73-2B-C9
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
32
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual