Allied Telesis AT-9724TS Reference Manual

show stp mst_config_id
Purpose Used to display the MSTP configuration identification.
Syntax show stp mst_config_id
Description This command displays the Switch’s current MSTP configuration identification.
Parameters None.
Restrictions None.
Example usage:
To show the MSTP configuration identification currently set on the Switch:
AT-9724TS:4# show stp mst_config_id
Command: show stp mst_config_id
Current MST Configuration Identification
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Configuration Name : 00:53:13:1A:33:24 Revision Level :0
MSTI ID Vid list
- - - - - - - - - - - - - - -
C I S T 2 - 4 0 9 4
1 1
A T - 9 7 2 4 T S : 4 #
78
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual

Allied Telesis AT-9724TS Specifications

General

MAC address table	16000 entries
Packet buffer memory	2 MB
Maximum data transfer rate	88 Gbit/s
Full duplex	Yes
Dimensions (WxDxH)	440 x 210 x 44 mm
Power requirements	100-240V AC/50-60Hz
Management platform	SNMP, RMON
Networking features	IEEE 802.3 10T Ethernet, IEEE 802.3u 100TX Ethernet, IEEE 802.3ab 1000T Ethernet, IEEE 802.3z 1000X Ethernet
Connectivity technology	Wired
DHCP features	DHCP client
Security algorithms	SSH
Switch type	Managed
Switch layer	L3+
SFP/SFP+ slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	24
Memory type	SDRAM / Flash
Flash memory	16 MB
Internal memory	256 MB
Power consumption (typical)	90 W
Certification	UL 1950 FCC Class A CSA 22.2 No. 950 EN55022 Class A EN 60950 (TUV) EN50082-1 CE
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	3200 g