AudioCodes Media 800 MSBR

Version 6.6 253 Mediant 800 MSBR
User's Manual 21. Coders and Profiles
Parameter Description
Web: SBC Remote Early Media
RTP
[IpProfile_SBCRemoteEarlyMed
iaRTP]
Defines whether the destination UA sends RTP immediately
after it sends 18x response.
 [0] Immediate = (Default) Remote client sends RTP
immediately after it sends 18x response with early media.
Device forwards 18x and RTP as is.
 [1] Delayed = After sending 18x response, the remote client
waits before sending RTP (e.g., Microsoft Lync
environment). For the device's handling of this remote UA
support, see Interworking SIP Early Media.
Web: SBC Remote Can Play
Ringback
[IpProfile_SBCRemoteCanPlay
Ringback]
Defines whether the destination UA can play a local ringback
tone.
 [0] No = UA does not support local ringback tone. The
device sends 18x with delayed SDP to the UA.
 [1] Yes = (Default) UA supports local ringback tone. For the
device's handling of this remote UA support, see
Interworking SIP Early Media.
Web: SBC Remote Supports RFC
3960
[IpProfile_SBCRemoteSupports
RFC3960]
Defines whether the destination UA is capable of receiving 18x
messages with delayed RTP.
 [0] Not Supported = (Default) UA does not support receipt of
18x messages with delayed RTP. For the device's handling
of this remote UA support, see Interworking SIP Early
Media.
 [1] Supported = UA is capable of receiving 18x messages
with delayed RTP.
Web: SBC Multiple 18x Support
[IpProfile_SBCRemoteMultiple1
8xSupport]
Determines whether multiple 18x responses (including 180
Ringing, 181 Call is Being Forwarded, 182 Call Queued, and
183 Session Progress) are forwarded to the caller.
 [0] Not Supported = Only the first 18x response is forwarded
to the caller.
 [1] Supported = (Default) Multiple 18x responses are
forwarded to the caller.
Web: SBC Early Media Response
Type
[IpProfile_SBCRemoteEarlyMed
iaResponseType]
Determines the SIP provisional response type - 180 or 183 - for
forwarding early media to the caller.
 [0] Transparent = (Default) All early media response types
are supported; the device forwards all responses as is
(unchanged).
 [1] 180 = Early media is sent as 180 response only.
 [2] 183 = Early media is sent as 183 response only.
Web: SBC Remote Update
Support
[IpProfile_SBCRemoteUpdateS
upport]
Determines whether endpoints support the UPDATE method.
 [0] Not Supported = UPDATE method is not supported.
 [1] Supported Only After Connect = UPDATE method is
supported only after the call is connected.
 [2] Supported = (Default) UPDATE method is supported
during call setup and after call establishment.