Parameter Description
Source Username Prefix
CLI: src-user-name-
prefix
[IPInboundManipulatio
n_SrcUsernamePrefix]
Defines the prefix of the source SIP URI user name (usually in the From
header).
For any prefix, enter the asterisk "*" symbol (default).
Note: The prefix can be a single digit or a range of digits. For available
notations, see 'Dialing Plan Notation for Routing and Manipulation' on
page 753.
Source Host
CLI: src-host
[IPInboundManipulatio
n_SrcHost]
Defines the source SIP URI host name - full name (usually in the From
header). For any host name, enter the asterisk "*" symbol (default).
Destination Username
Prefix
CLI: dst-user-name-
prefix
[IPInboundManipulatio
n_DestUsernamePrefix
]
Defines the prefix of the destination SIP URI user name (usually in the
Request-URI).
For any prefix, enter the asterisk "*" symbol (default).
Note: The prefix can be a single digit or a range of digits. For available
notations, see 'Dialing Plan Notation for Routing and Manipulation' on
page 753.
Destination Host
CLI: dst-host
[IPInboundManipulatio
n_DestHost]
Defines the destination SIP URI host name - full name (usually in the
Request URI).
For any host name, enter the asterisk "*" symbol (default).
Request Type
CLI: request-type
[IPInboundManipulatio
n_RequestType]
Defines the SIP request type to which the manipulation rule is applied.
[0] All = (Default) All SIP messages.
[1] INVITE = All SIP messages except REGISTER and SUBSCRIBE.
[2] REGISTER = Only REGISTER messages.
[3] SUBSCRIBE = Only SUBSCRIBE messages.
[4] INVITE and REGISTER = All SIP messages except SUBSCRIBE.
[5] INVITE and SUBSCRIBE = All SIP messages except REGISTER.
Manipulated URI
CLI: manipulated-uri
[IPInboundManipulatio
n_ManipulatedURI]
Determines whether the source or destination SIP URI user part is
manipulated.
[0] Source = (Default) Manipulation is done on the source SIP URI
user part.
[1] Destination = Manipulation is done on the destination SIP URI
user part.
Operation Rule (Action)
Remove From Left
CLI: remove-from-left
[IPInboundManipulatio
n_RemoveFromLeft]
Defines the number of digits to remove from the left of the user name
prefix. For example, if you enter 3 and the user name is "john", the new
user name is "n".
Remove From Right
CLI: remove-from-right
[IPInboundManipulatio
n_RemoveFromRight]
Defines the number of digits to remove from the right of the user name
prefix. For example, if you enter 3 and the user name is "john", the new
user name is "j".
Note: If both 'Remove From Right' and 'Leave From Right' parameters
are configured, the 'Remove From Right' setting is applied first.
Leave From Right
CLI: leave-from-right
[IPInboundManipulatio
n_LeaveFromRight]
Defines the number of characters that you want retained from the right of
the user name.
Note: If both 'Remove From Right' and 'Leave From Right' parameters
are configured, the 'Remove From Right' setting is applied first.
To Next Page
Loading...
