[\NumberMapTel2Ip]
For example:
NumberMapTel2Ip 0 = 01,$$,*,0,0,2,$$,$$,971,$$,$$,$$,$$;
NumberMapTel2Ip 1 = 10,10,*,255,255,3,0,5,100,$$,255,$$,$$;
Note: For a detailed description of this table, see 'Configuring
Source/Destination Number Manipulation' on page 303.
Source Phone Number Manipulation for IP-to-Tel Calls Table
Web: Source Phone
Number Manipulation Table
for IP > Tel Calls
EMS: SIP Manipulations >
Source IP to Telcom
CLI: configure voip > gw
manipulations
SourceNumberMapIp2Tel
[SourceNumberMapIP2Tel
]
This parameter table manipulates the source number for IP-to-Tel calls.
The format of this parameter is as follows:
[SourceNumberMapIp2Tel]
FORMAT SourceNumberMapIp2Tel_Index =
SourceNumberMapIp2Tel_DestinationPrefix,
SourceNumberMapIp2Tel_SourcePrefix,
SourceNumberMapIp2Tel_SourceAddress,
SourceNumberMapIp2Tel_NumberType,
SourceNumberMapIp2Tel_NumberPlan,
SourceNumberMapIp2Tel_RemoveFromLeft,
SourceNumberMapIp2Tel_RemoveFromRight,
SourceNumberMapIp2Tel_LeaveFromRight,
SourceNumberMapIp2Tel_Prefix2Add,
SourceNumberMapIp2Tel_Suffix2Add,
SourceNumberMapIp2Tel_IsPresentationRestricted;
[\SourceNumberMapIp2Tel]
For example:
SourceNumberMapIp2Tel 0 = 22,03,$$,$$,$$,$$,2,667,$$,$$;
SourceNumberMapIp2Tel 1 = 034,01,1.1.1.1,$$,0,2,$$,$$,972,$$,10;
Note: For a detailed description of this table, see 'Configuring
Source/Destination Number Manipulation' on page 303.
EMS: Perform Additional
IP2TEL Source
Manipulation
CLI: prfm-ip-to-tel-src-map
[PerformAdditionalIP2TEL
SourceManipulation]
Enables additional source number manipulation for IP-to-Tel calls. The
additional manipulation is done on the initially manipulated source
number, and this additional rule is also configured in the manipulation
table (SourceNumberMapIP2Tel parameter). This enables you to
configure only a few manipulation rules for complex number
manipulation requirements (that generally require many rules).
[0] = Disable (default)
[1] = Enable
Source Phone Number Manipulation for Tel-to-IP Calls Table
Web: Source Phone
Number Manipulation Table
for Tel > IP Calls
EMS: SIP Manipulations >
Source Telcom to IP
CLI: configure voip > gw
manipulations
SourceNumberMapTel2Ip
[SourceNumberMapTel2IP
]
This table parameter manipulates the source phone number for Tel-to-
IP calls. The format of this parameter is as follows:
[SourceNumberMapTel2Ip]
FORMAT SourceNumberMapTel2Ip_Index =
SourceNumberMapTel2Ip_DestinationPrefix,
SourceNumberMapTel2Ip_SourcePrefix,
SourceNumberMapTel2Ip_SourceAddress,
SourceNumberMapTel2Ip_NumberType,
SourceNumberMapTel2Ip_NumberPlan,
SourceNumberMapTel2Ip_RemoveFromLeft,
SourceNumberMapTel2Ip_RemoveFromRight,
SourceNumberMapTel2Ip_LeaveFromRight,
SourceNumberMapTel2Ip_Prefix2Add,
To Next Page
Loading...
