Syntax
[no] debug ospf nfsm [events|status|timers]
Table 51: Variable definition
Variable Value
[events] NFSM event information.
[status] NFSM status information.
[timers] NFSM timer information.
Example
SR# debug ospf nfsm status
debug ospf nsm
Use this command to debug OSPF RIB information.
Syntax
[no] debug ospf nsm [interface|redistribute]
Table 52: Variable definition
Variable Value
[interface] The RIB interface.
[redistribute] RIB redistribution.
Example
SR# debug ospf nsm interface
debug ospf packet
Use this command to debug OSPF packets.
Syntax
[no] debug ospf packet <pkttype>
Table 53: Variable definition
Variable Value
<pkttype> The packet type. Available choices are:
Troubleshooting unicast routing
138 Troubleshooting August 2013
Comments? infodev@avaya.com