Avaya 2330/4134 - Chapter 4: Global Troubleshooting Tasks; Using Debug Commands; Logging into the Router; Viewing Debug Commands through Telnet

Chapter 4: Global troubleshooting tasks
Using debug commands
Debug commands are used to troubleshoot various features of the Avaya Secure Router
2330/4134.
While this book contains some common debug commands, you should refer to the
Avaya Secure Router 2330/4134 — Command Line Reference (NN47263-507) for a complete
listing and usage instructions.
Logging into the router
This procedure describes the steps necessary to log on to the Secure Router 2330/4134.
Procedure steps
To log on to the Secure Router 2330/4134, enter the username and password:
login:
admin
password: setup
Viewing debug commands through telnet
This procedure describes the steps necessary to enable terminal monitor. Terminal monitor
must be enabled to view debug commands when using telnet.
Procedure steps
1.
Log on to the Secure Router 2330/4134 using telnet.
2. From the prompt, enter
SR# configure terminal
3. Enter
SR/ configure# terminal monitor
Debug commands will now be displayed through the telnet connection.
Troubleshooting August 2013
19