Figure 68: debug voice cc cas sample output
Figure 69: debug voice cc cas sample output (continued)
FXS/FXO port status LEDs
The status LEDs on the front plate of the FXS/FXO cards can be used for debugging. If the
LEDs are off, the card is not detected or is in hot swap shutdown mode. The following table
describes how to interpret the other LED colors.
LED color Description
Red Not configured
Amber Configured and idle
Troubleshooting a SIP Media Gateway problem
332 Troubleshooting August 2013
Comments? infodev@avaya.com
To Next Page
Loading...
