Variable Value
<install> Route installation information.
<spf> SPF calculation information.
debug ipv6 ospf all
Use this command to enable or disable all OSPFv3 debugging.
debug ipv6 ospf all
Debug command options for BGP and BGP+ for IPv6
This
section describes debug command options that you use to troubleshoot issues with BGP
and BGP+ for IPv6.
debug bgp
Use this command to debug the Border Gateway Protocol.
Syntax
[no] debug bgp
Example
SR# debug bgp
debug bgp all
Use this command to enable all BGP debugging features.
Syntax
[no] debug bgp all
Example
SR# debug bgp all
Debug command options for BGP and BGP+ for IPv6
Troubleshooting August 2013 143
To Next Page
Loading...
