Avaya 2330/4134 - Debug Ipv6 Rip All; Debug Ipv6 Rip Events; Debug Ipv6 Rip Nsm; Debug Ipv6 Rip Packet

Example
SR# debug ipv6 rip
debug ipv6 rip all
Use this command to enable all RIP debugging.
Syntax
[no] debug ipv6 rip all
Example
SR# debug ipv6 rip all
debug ipv6 rip events
Use this command to debug RIPng events.
Syntax
[no] debug ipv6 rip events
Example
SR# debug ipv6 rip events
debug ipv6 rip nsm
Use this command to debug RIPng and NSM communications.
Syntax
[no] debug ipv6 rip nsm
Example
SR# debug ipv6 rip nsm
debug ipv6 rip packet
Use this command to debug RIPng packets.
Syntax
[no] debug ipv6 rip packet
Example
SR# debug ipv6 rip packet
Troubleshooting unicast routing
148 Troubleshooting August 2013
Comments? infodev@avaya.com