Avaya 2330/4134 - Configuring the System for Syslog Reporting; Enabling and Disabling Syslog Messages; Specifying the Device to Which the Secure Router 2330;4134 Sends Syslog Messages

Level Description
Warning Warning condition
Notification Normal but significant condition
Informational Informational only
Debugging Message that appears only during debugging
Configuring the system for syslog reporting
Use the commands in this section to enable and disable syslog reporting and to define
parameters for syslog messages.
Enabling and disabling syslog messages
Use the commands in this section to enable and disable syslog messages.
Procedure steps
1.
To access configuration mode, enter:
configure terminal
2. To enable or disable syslog messages, enter:
system logging syslog {enable|disable}
Specifying the device to which the Secure Router 2330/4134 sends
syslog messages
Use the commands in this section to specify the host IP address to which the Secure Router
2330/4134 sends syslog messages
Procedure steps
1.
To access configuration mode, enter:
configure terminal
2. To specify the host IP address (IPv4 address) to which the Secure Router
2330/4134 sends syslog messages, enter:
Secure Router 2330/4134 system error messages
376 Troubleshooting August 2013
Comments? infodev@avaya.com