Avaya 2330/4134 - ADSL SM Card Software Image

ADSL SM Card Software Image
Use this section to solve the issues if:
•
the ADSL configuration commands fail
• the ADSL bundles fail to come-up
Solution
• Issue a show module configuration xdsl <slot/1> command at the CLI prompt
and look for the software version.
• Compare the software version with the version recommended for the card type.
show module configuration sample output for software version
MT-6013# show module configuration xdsl 1/1
Software Version: 3.10L.06.A2pB022g.d20h
adsl: ADSL driver and PHY status
Status: ShowtimeRetrain Reason: 1
Channel: FAST, Upstream rate=1094 Kbps, Downstream rate = 22624 Kbps
Link Power State: LO
Mode: ADSL2+
Line Status: No Defect
SNR (dB): 6.8 7.0
Attn(dB): 1.0 0.0
Pwr(dBm): 7.5 0.8
Trellis Coding: Enable
BitSwap Coding: Disable
SRA: Disable
L3 Power State: Disable
ADSL SM Card Software Image
Troubleshooting August 2013 183