Avaya 2330/4134 - Syslog Error Messages that Indicate a Possible Fault in the System

Table 89: Variable definitions
Variable Value
{enable | disable} Enables or disables console logging. The
default value is "enable".
<priority> The severity level of the message. Valid
values are the following:
•
emerg – log emergency messages only
• alert – log alert messages and above
• crit – log critical messages and above
• err – log error messages and above
• warn – log warning messages and above
• notice – log notification messages and
above
• info – log informational messages and
above
• debug – log all messages
• none – log no messages
The default value is "critical".
Syslog error messages that indicate a possible fault in the
system
The following table provides a list of Secure Router 2330/4134 syslog error messages that
indicate a possible fault condition in the Secure Router 2330/4134. If you receive one of the
following error messages, contact Technical Support.
Table 90: Syslog error messages that require Avaya Technical Support assistance
Security Level Module Message
ALERT FORWARDING RouteCacheInit: Warning:Unable to
allocate complete pool of cache
entries.
ALERT FORWARDING Error : Failed init UAM event queue
ALERT FORWARDING Error : Failed init ARP event queue
CRITICAL FORWARDING ipOutput: invalid interface <x>
Secure Router 2330/4134 system error messages
382 Troubleshooting August 2013
Comments? infodev@avaya.com