debug ipv6 rip packet detail
Use this command to display detailed information.
Syntax
[no] debug ipv6 rip packet detail
Example
SR# debug ipv6 rip packet detail
debug ipv6 rip packet recv
Use this command to debug RIPng receive packets.
Syntax
[no] debug ipv6 rip packet recv
Example
SR# debug ipv6 rip packet recv
debug ipv6 rip packet send
Use this command to debug RIPng send packets.
Syntax
[no] debug ipv6 rip packet send
Example
SR# debug ipv6 rip packet send
Debug command options for VRRP
This section describes debug command options that you use to troubleshoot issues with
VRRP.
debug ip vrrp
Use this command to enable or disable VRRP debugging.
Debug command options for VRRP
Troubleshooting August 2013 149
To Next Page
Loading...
