Avaya 2330/4134 - Codec Mismatch

You can configure the SIP server globally by entering the following commands
config term
sip-ua sip-server ipv4:47.100.107.46:5060
exit
Alternatively, you can configure a VoIP dial peer by entering the following commands
config term
dial-peer voice voip 100
session target ipv4:47.100.107.46:5060
destination-pattern 408.%T
no shutdown
exit
exit
Codec mismatch
To
troubleshoot a potential codec mismatch, enable SIP debugging using the debug ccsip
message command.
Troubleshooting a SIP Media Gateway problem
356 Troubleshooting August 2013
Comments? infodev@avaya.com