Avaya 2330/4134 - Debug Rip Nsm; Debug Rip Packet; Debug Command Options for Ripng for Ipv6; Debug Ipv6 Rip

debug rip nsm
Use this command to debug RIP RIB information.
Syntax
[no] debug rip nsm
Example
SR# debug rip nsm
debug rip packet
Use this command to debug RIP packets.
Syntax
[no] debug rip packet <detail|recv|send>
Table 63: Variable definition
Variable Value
<detail> Detailed information displayed.
<recv> Debug RIP receive packets.
<send> Debug RIP send packets.
Example
SR# debug rip packet detail
Debug command options for RIPng for IPv6
This
section describes debug command options that you use to troubleshoot issues with RIPng
for IPv6.
debug ipv6 rip
Use this command to enable RIP debugging for IPv6.
Syntax
[no] debug ipv6 rip
Debug command options for RIPng for IPv6
Troubleshooting August 2013 147