Avaya 2330/4134 - Packet Capture Commands

filter acc1 in
commit
exit
capture cap2
filter acc1 out
attach bundle wan1
commit
exit
enable
Packet capture commands
debug pcap
Use this command to configure next level packet capture commands.
Syntax
[no] debug pcap
Example
SR# debug pcap
debug pcap capture
Use this command to access packet capture related commands.
Syntax
[no] debug pcap capture <capname>
Table 2: Variable definition
Variable Value
<capname> The name for the capture session.
Example
SR# debug pcap capture cap1
debug pcap capture direction
Use this command to configure packet capture direction.
Syntax
direction <in|out|both>
Packet capture
Troubleshooting August 2013 31