Avaya 2330/4134 - Debug Ccsip Messages; Debug Isdn Q921

Table 72: Variable definitions
Variable Value
calling-num <calling-number> Filters debugging information based on
calling-number.
called-num <called-number> Filters debugging information based on
called-number.
Example
SR# debug ccsip media
debug ccsip messages
Use
this command to enable SIP message debugging. If no parameters are specified, all SIP
messages are output. Use the no form of this command to disable the debug messages.
Syntax
[no] debug ccsip messages [calling-num <calling-number>] [called-num
<called-number> ]
Table 73: Variable definitions
Variable Value
calling-num <calling-number> Filters debugging information based on
calling-number.
called-num <called-number> Filters debugging information based on
called-number.
Example
SR# debug ccsip messages
debug isdn q921
Use
this command to enable Q921 related ISDN debugging. Use the no form of this command
to disable the debug messages.
Syntax
[no] debug isdn q921 <bundle-name>
Table 74: Variable definitions
Variable Value
<bundle-name> Specifies the ISDN bundle name.
Troubleshooting a SIP Media Gateway problem
306 Troubleshooting August 2013
Comments? infodev@avaya.com