Avaya 2330/4134 - Importing from a Network Location; Viewing the Current Configuration

Importing from a network location
Import a saved configuration from a network location.
Procedure steps
1.
To import a saved configuration from a network location, enter the following
command:
configuration network
2. When prompted, enter the host and filename. For example:
host: X.X.X.X
fileName: /path/folder/system.cfg
Viewing the current configuration
This procedure describes the steps necessary to view the current system configuration.
Procedure steps
To view the current system configuration, run either of the following commands:
show running-config
show configuration running
Global troubleshooting tasks
50 Troubleshooting August 2013
Comments? infodev@avaya.com