Example
SR# debug pim sparse-mode database
debug pim sparse-mode packet
Use this command to debug PIM packets.
Syntax
[no] debug pim sparse-mode packet <packettype>
Table 66: Variable definition
Variable Value
<packettype> The packet type to debug. Possible choices are:
• all - All packets.
• hello - Hello packets.
• register - PIM register messages.
• jp - Join/Prune messages.
• bsr - BSR messages.
• assert - PIM assert messages.
• crp - CRP messages.
• in - Incoming PIM packets.
• out - Outgoing PIM packets.
Example
SR# debug pim sparse-mode packet in
debug pim sparse-mode state
Use this command to debug the PIM state.
Syntax
[no] debug pim sparse-mode state
Example
SR# debug pim sparse-mode state
Troubleshooting PIM-SM
Troubleshooting August 2013 165
To Next Page
Loading...
