debug ip tunnel state
Use this command to debug interface state change messages.
Syntax
[no] debug ip tunnel state
Example
SR# debug ip tunnel state
debug ipv6 tunnel
Use this command to enable or disable tunnel debug commands.
Syntax
[no] debug ipv6 tunnel
Example
SR# debug ipv6 tunnel
debug ipv6 tunnel all
Use this command to debug all messages.
Syntax
[no] debug ipv6 tunnel all
Example
SR# debug ipv6 tunnel all
debug ipv6 tunnel error
Use this command to debug error messages.
Syntax
[no] debug ipv6 tunnel error
Example
SR# debug ipv6 tunnel error
Troubleshooting security
210 Troubleshooting August 2013
Comments? infodev@avaya.com
To Next Page
Loading...
