packets i.e. packets with no IPv4 or IPv6 payloads. For example, if you
configure a non-ip rule using destination / source MAC address field for
classification and you send IPv4 traffic with the specified destination / source
MAC address, classification will not happen. Instead, use ipv4 rule to match
packets based on MAC address since the packet payload contains IPv4
header.
• Accounting
not enabled for the class-map. For the user to see the classification
counters, accounting needs to be enabled for the class-map.
• Accounting
disabled globally. Accounting is enabled globally by default. Verify
that accounting is enabled globally.
Troubleshooting Quality of Service
282 Troubleshooting August 2013
Comments? infodev@avaya.com
To Next Page
Loading...
