Figure 43: show voice dsp status sample output for active DSP channels
For any of the displayed codecs, if any of the additional channel capacity is 0, no more calls
can be created using that codec.
You can use the same command to verify the licensed DSP channel capacity on the Secure
Router 2330/4134.
Figure 44: show voice dsp status sample output for maximum DSP channels
To upgrade the DSP channel capacity, contact Avaya customer support for a DSP license
upgrade. You must provide Avaya customer support with the serial number of the Secure
Router 2330/4134 motherboard and the maximum number of channels required.
To obtain the motherboard serial number (listed as MPU_A card type), enter the show
chassis
command.
Troubleshooting a SIP Media Gateway problem
314 Troubleshooting August 2013
Comments? infodev@avaya.com
To Next Page
Loading...
