debug pcap capture attach
Use this command to configure a packet capture session for the interface.
Syntax
attach [bundle <bundle>] [ethernet <ethernet>]
Table 5: Variable definition
Variable Value
<bundle> The bundle name.
<ethernet> The ethernet interface name.
Example
SR# debug pcap capture cap1
SR/debug/pcap/capture cap1# attach bundle bun1
debug pcap capture commit
Use this command to commit packet capture configurations.
Syntax
commit
Example
SR# debug pcap capture cap1
SR/debug/pcap/capture cap1# commit
debug pcap capture show-config
Use this command to show packet capture configuration.
Syntax
show-config
Example
SR# debug pcap capture cap1
SR/debug/pcap/capture cap1# show-config
Global troubleshooting tasks
34 Troubleshooting August 2013
Comments? infodev@avaya.com
To Next Page
Loading...
