Figure 90: show dial-peer voice summary sample output
The
display confirms that there are no dial peers configured with the dialed destination pattern
of 3087771004.
If the number is expected to be handled by Secure Router 2330/4134, then you must configure
a dial peer with a destination pattern of 3087771004.
Dialed number is busy
The following figure shows a sample output for the debug voice cc routing command
in which the Returning CC 486 message indicates that the dialed destination number is
busy.
Figure 91: debug voice cc routing sample output
To display the active calls on the Secure Router 2330/4134, enter the show sip-ua
calls command.
Common problems and solutions
Troubleshooting August 2013 349
To Next Page
Loading...
