Figure 109: Capture Options dialog box
3.
In the Interface box, ensure that the correct interface is specified. In this example,
traffic is captured on the Mediation Server module backplane Ethernet interface.
4. When the correct interface is specified, click Start.
5. In the Filter window, you have the option of specifying a filter to limit the number of
packets you want to filter. Select sip to capture the voice signaling traffic (SIP) and
rtp to capture the voice media traffic (RTP).
Troubleshooting a SIP Media Gateway problem
364 Troubleshooting August 2013
Comments? infodev@avaya.com
To Next Page
Loading...
