Becker MEXICO - Page 168

168
Settings
X Select +DQGVIUHH to connect the mobile
phone via the hands-free profile or
6,0$FFHVV to connect via the SIM-Ac-
cess profile.
Further operation differs depending on
the selection.
Hands-free profile
If
+DQGVIUHH is selected, the Mexico
attempts to establish a hands-free profile
connection to the desired device.
You may be required to enter a password
depending on which device you are
trying to connect.
X Enter the password by rotating/
pressing the rotary control/push
button .
X Select the symbol from the
input menu.
or
X press the rotary control/push button
and hold for at least 2 seconds.
A connection will be established to the
required device. The device has now
been now authenticated.
If it was not possible to establish a
connection, the Mexico will notify you
of this on the display.
Note:
The device to be connected is addressed
by Mexico and signals which profiles
are supported by the device. Depending
on the message received back, the
6,0
$FFHVV
option may not be available. In
some devices, no message is sent back
but the
6,0$FFHVV option is still availa-
ble. It may be the case, however, that a
connection cannot be established.
7037
Note:
You will find further information on
this in the instructions for the device
which you are trying to connect.
For some devices a fixed password has
been specified by the manufacturer.
Enter this password. With other devices
you can choose a number code with 1 -
16 digits. This code must be entered in
the Mexico and the device to be
connected.
Note:
If a different device was already
connected, this will be disconnected.
7038