Becker MEXICO - Displaying Traffic Announcements; Displaying;Storing Position

53
Navigation mode
Displaying/Storing position
X Press .
X Turn the rotary control/push button
clockwise until
3RVLWLRQ appears on the
top right of the display.
The following information appears:
• If possible, the town and road/geo-
graphical coordinates and height above
sea level (only in the event of sufficient
satellite reception) appear on the left-
hand side of the display.
• The number of satellites which have
been/can be received appears above
the image of the car.
X Press the rotary control/push button
to store the current position.
The current position was saved in fast
access mode.
Displaying traffic
announcements
X Press .
X Turn the rotary control/push button
clockwise until
70& appears on
the top right of the display.
The following information appears:
• The number of TMC messages
received.
• The number of TMC messages rele-
vant to the route.
X Press the rotary control/push button
.
All TMC messages are displayed.
X To listen to all announcements, select
the
5HDGRXWDOOPHVVDJHV entry.
or
X Select the required announcement.
X Confirm your selection by pressing
the rotary control/push button .
The announcement appears in full.
For more information about traffic
announcements, see “Displaying traffic
information” on page 56.
2077
2078
2079
2069