Becker MEXICO - External Points of Interest

43
Navigation mode
External points of interest
You can select an external POI as a main
destination or as a stopover.
X Insert a storage medium with external
POIs.
X In the Navigation main menu, select
the
3RLQWRI,QWHUHVWH[WHUQDO entry.
X Confirm your selection by pressing
the rotary control/ push button .
or if route guidance is already active
X In the navigation status display, press
the rotary control/push button .
The Options menu appears.
X Select the 6WRSRYHU entry.
X Confirm your selection by pressing
the rotary control/ push button .
X Select the 3RLQWRI,QWHUHVWH[WHUQDO en-
try.
X Confirm your selection by pressing
the rotary control/ push button .
The POI menu appears.
X Turn the rotary control/push button
to select one of the following op-
tions:
,QYLFLQLW\RIORFDWLRQ or
,QYLFLQLW\RIGHVWLQDWLRQ
.
X Confirm your selection by pressing
the rotary control/ push button .
•
,QYLFLQLW\RIORFDWLRQ
You can select a POI in the vicinity of
the vehicle. When you make your se-
lection, the unit will tell you in which
direction the POI is located and how
far away it is.
• ,QYLFLQLW\RIGHVWLQDWLRQ
You can select a POI in the vicinity of
the destination. This provides no infor-
mation on the direction and distance.
Described below is how to opeate it via
the
,QYLFLQLW\RIORFDWLRQ menu item.
Note:
The
3RLQWRI,QWHUHVWH[WHUQDO menu item
can only be selected if, for example, a
storage medium with external points of
interest has been inserted and recog-
nised.
2102
2038
2103
2104
Note:
The
,QYLFLQLW\RIGHVWLQDWLRQ entry can only
be selected if route guidance is active.