Becker MEXICO - Selecting a Waveband

62
Radio mode
• 5HFHSWLRQRSWLPLVDWLRQ
Accesses the selection menu for
reception optimisation. See “Recep-
tion optimisation” on page 69.
•
$GDSWLYHEDQGZLGWKFRQWURO
You can switch bandwidth control on/
off. See “Bandwidth control” on
page 70.
Selecting a waveband
X In the Radio main menu, select :DYH
EDQG
.
X Turn the rotary control/push button
to select one of the following options:
)0DOSKDEHWLFDOO\,
)0E\TXDOLW\,
6WDWLRQPHPRU\,
$0 or
6KRUWZDYH
X Confirm your selection by pressing
the rotary control/push button .
The selected waveband is set.
•
)0DOSKDEHWLFDOO\
If an FM station was selected previ-
ously, it will remain selected or, if an
AM station was selected, the last FM
station selected will be set.
The Fast Access menu appears. All
receivable stations which are not fil-
tered out, appear in the list in alpha-
betical order.
The waveband set is indicated by the
symbol in the status display.
•
)0E\TXDOLW\
If an FM station was selected previ-
ously, it will remain selected or, if an
AM station was selected, the last FM
station selected will be set.
The Fast Access menu appears. All
receivable stations which are not fil-
tered out, appear in the list in order of
quality.
The waveband set is indicated by the
symbol in the status display.
•
6WDWLRQPHPRU\
The last station set is retained.
The station memory, which can store
up to 20 FM and AM waveband sta-
tions, is displayed.
The waveband set is indicated by the
symbol in the status display.
See “Station memory” on page 74.
•
$0
The last medium wave station selected
is set.
The status display appears.
The waveband set is indicated by the
symbol in the status display.
•
6KRUWZDYH
The last short wave station selected is
set.
The status display appears.
The waveband set is indicated by the
symbol in the status display.
3002