205
Voice mode
Commands in the Voice Entries menu
In the Voice Entries menu, the following
commands are available (page 69):
• Switch voice dialogue on/off when
saving.
Switch on:
Say the command Dialogue for
voice entries [on] or Activate dia-
logue for voice entries.
Switch off:
Say the command Dialogue for
voice entries off or Deactivate dia-
logue for voice entries.
• Read out assigned voice entries.
Say the command Read out
entries.
Alternative commands:
Read out [all] voice entries or Read
out [all] entries.
• Delete all assigned voice entries.
Say the command Delete entries.
Alternative commands:
Delete [all] entries or Delete [all]
voice entries.
Commands in the Reception
Optimisation menu
In the Reception Optimisation menu, the
following commands are available
(page 69):
• Set automatic.
Say the command Automatic or
Select [automatic reception] optimi-
sation [menu].
• Set stereo.
Say the command Always stereo or
[Select] [always] stereo.
• Set mono.
Say the command Always mono or
[Select] [always] mono.