Becker MEXICO - Compression; Reset Settings

21
General operation
In this example you can see the settings
for the front loudspeakers.
X Turn the rotary control/push button
to select the required value.
Compression
This function enables you to switch the
reduction of the dynamic range of the
audio signal on/off.
X Select &RPSUHVVLRQ in the sound set-
tings.
X Press the rotary control/ push button
to switch the function on ( ) or
off ( ).
Reset settings
You can reset all sound settings to the
default settings.
The following settings are reset to the
relevant default value:
•
(TXDOLVHU: All default settings are reset
to the initial value. The user-defined
setting is reset to zero.
•
%DODQFHIDGHU to centre setting
•
/RXGQHVV to off
• %HFNHUVXUURXQG to off
•
6XEZRRIHU to RII.
•
&URVVRYHU front and rear loudspeakers
to
RII, subwoofer to 100 Hz.
• &RPSUHVVLRQ to RII.
X Select 5HVHW VHWWLQJV in the sound set-
tings.
X Select <HV to reset the sound settings
or
1R to continue without making any
changes.
Select
<HV to reset the sound settings.
1026
1027
1020