218
Voice mode
• Select a stopover as destination.
Say the command Enter special
destination or Special destination.
• Select a stopover from the fast access
list.
Say the command Rapid access or
[Select] [destination] via rapid
access.
Prompt: Is the new destination a main
destination or a stopover?
• Set as main destination.
Say the command Main destina-
tion or Enter main destination.
• Set as stopover.
Say the command Stop-over or
Enter stop-over.
Commands for telephone, mail
and WAP mode
Commands for the PIN input
menu
In the PIN input menu, the following
commands are available (page 93):
• You can state the PIN.
State the PIN e.g.
1 - 3 - 4 - 5.
• Delete the number entered.
Speak the command Delete input.
Alternative commands:
Delete [entire] input, Delete [entire]
number or Delete all.
• You can correct the entry.
Speak the command Correction or
Correct.
2096
5050