Becker MEXICO - Radio Mode; Calling up the Radio Main Menu

61
Radio mode
Radio mode
Switching on radio mode
X Press .
Radio mode is activated. The last wave-
band selected and the last station selected
are set.
Calling up the Radio main
menu
You can make settings for radio mode in
the Radio main menu.
The following description assumes that
you are in the status display.
X Press twice in succession.
or
X Press .
The Fast Access menu appears.
X Select the 5DGLRPHQX entry.
The Radio main menu appears.
The example shows the Radio main
menu for VHF.
X Turn the rotary control/push button
to select one of the following options:
:DYHEDQG,
3URJUDPPHW\SH,
)LOWHU,
7UDIILFLQIR,
6RXQG,
9RLFHHQWULHV,
5HJLRQDOLVDWLRQ,
5HFHSWLRQRSWLPLVDWLRQ or
$GDSWLYHEDQGZLGWKFRQWURO
X Confirm your selection by pressing
the rotary control/push button .
The required function is called up.
•
:DYHEDQG
Accesses the selection menu for the
waveband. See “Selecting a wave-
band” on page 62.
•
3URJUDPPHW\SH
Accesses the selection menu for the
programme type. See “Programme
type” on page 67.
•
)LOWHU
Accesses the selection menu for the
filter function. See “Filter function”
on page 65.
•
7UDIILFLQIR
Accesses the selection menu for traffic
programmes. See “Traffic programme”
on page 70.
•
6RXQG
Accesses the sound settings. See
“Sound settings” on page 17.
•
9RLFHHQWULHV
Accesses the selection menu for voice
entries. See “Voice entries” on
page 69.
•
5HJLRQDOLVDWLRQ
You can switch regionalisation on/off.
See “Regionalisation” on page 68.
3001