Becker MEXICO - Clock; Direction of Rotation of the Rotary

186
Settings
Direction of rotation of the
rotary control/push button
You can specify the direction in which
lists and menus are scrolled when the
rotary control/push button is turned.
X Select 'LUHFWLRQRIURWDU\DFWXDWRU in the
system settings.
X Select &ORFNZLVH  GRZQZDUGV or &ORFN
ZLVH XSZDUGV
(on = ).
Clock
You can configure the GMT time sent
by the satellite in terms of its format and
the current time zone.
The time needs to be set so that the
Mexico can supply navigation
information correctly on routes with
time-dependent route guidance. Setting
the time also ensures that anticipated
times of arrival are announced/
displayed correctly.
X Select &ORFN in the system settings.
The Clock Settings menu appears. The
current time setting appears on the right-
hand side of the display.
X You may now select between &KDQJH
IRUPDW
, )RUZDUG  PLQXWHV and
%DFNZDUGPLQXWHV.
•
&KDQJHIRUPDW
You can switch the time display
format from 12 to 24-hour and vice
versa.
•
)RUZDUGPLQXWHV
You can put the time forward in
intervals of 30 minutes.
• %DFNZDUGPLQXWHV
You can put the time back in intervals
of 30 minutes.
X Press the rotary control/push button
to execute the relevant function.
Note:
Only one of the two settings may be
active ( ).
7025
Note:
The menu item cannot be selected if
GPS reception is not available.
7051